玖鼎集团

玖鼎集团·(中国区)有限公司官网

CN

Home
Company

Company

Profile Culture Team Qualifications and honors Intelligent manufacturing Informationize&Industrialization R&D Video Center
News

News

ALL Marketing Electronic intelligent manufacturing
Product

Product

Isolated Barrier Isolator Temperature Transmitter SPD Energy Transmitter Indicator Safety Relay
Application

Application

Petrochemical Oil and gas Metallurgy Municipal engineering Electric power Biopharmaceutical Equipment manufacturing Environmental protection Rail
Service and support

Service and support

Technical support Download Contact

玖鼎集团·(中国区)有限公司官网

选型

序号

产品

数量

操作
1

5V Signal systemS-FLT-2-5.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2 wire RTD, TC，RS-485, MODBUS, PROFIBUS-DP, CAN and other products.

- +
2

Three-phase(TN-S、TT) AC systemP-FL-385/40×3P+N
According to IEC and GB standard，SPD can release high voltage pulse energy,and limit surge in a safety voltage level. The complete device consists of a base module and plug-in protection modules and is ready for installation. It is suitable for LPZ0B ~ LPZ1 area and higher.

- +
3

Source EthernetT-FL-5-RJ45.PoE
According to IEC and GB standard，SPD can release high voltage pulse energy,and limit surge in a safety voltage level. It is suitable for LPZ0B ~ LPZ1 area and higher.

- +
4

RJ45 Port standard (100MHz)T-FL-5-RJ45
According to IEC and GB standard，SPD can release high voltage pulse energy,and limit surge in a safety voltage level. It is suitable for LPZ0B ~ LPZ1 area and higher.

- +
5

24V Signal systemS-FLT-2-24.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2 - wire pressure transmitter, valve positioner, electr i c a l converter, flowmeter, solenoid valve and other field instruments and FF, PROFIBUS PA ect.

- +
6

1 input and 2 outputsNPEXA-CM311
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
7

24V Signal systemS-FLT-2D-24
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2-wire pressure transmitter, valve positioner, electr i c a l converter, flowmeter, solenoid valve and other field instruments and FF, PROFIBUS-PA ect.

- +
8

24V Signal systemS-FLP-3P-24.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 3-wire transmitter, RS232 and RTD ect.

- +
9

B系列智能手操器
智能手操器拥有多种类型输入可编程职能，能够配接调节器、PLC或DCS的输入信号，驱动节造阀门作为，也可与各类传感器、变送器共同使用，实现对温度、压力、液位、容量、力等物理量的丈量显示、调节、报警节造和数据采集，其合用领域极度宽泛。

- +
10

B系列智能手操器
智能手操器拥有多种类型输入可编程职能，能够配接调节器、PLC或DCS的输入信号，驱动节造阀门作为，也可与各类传感器、变送器共同使用，实现对温度、压力、液位、容量、力等物理量的丈量显示、调节、报警节造和数据采集，其合用领域极度宽泛。

- +
11

B系列智能手操器
智能手操器拥有多种类型输入可编程职能，能够配接调节器、PLC或DCS的输入信号，驱动节造阀门作为，也可与各类传感器、变送器共同使用，实现对温度、压力、液位、容量、力等物理量的丈量显示、调节、报警节造和数据采集，其合用领域极度宽泛。

- +
12

1 input and 1 outputNPGLA-C11D
This LCD isolator converts the current signals to 4~20mA signals, and also provides transmitters with power. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
13

1 input and 1 outputNPGLB-CM11D
This isolator accepts 4 ~ 20 mA signal to drive executive mechanisms. It allows transmission of HART communication signals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other.

- +
14

1 input and 1 outputNPGLB-CM11D
This isolator accepts 4 ~ 20 mA signal to drive executive mechanisms. It allows transmission of HART communication signals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other.

- +
15

1 input and 1 outputNPGL-CM11SD
This isolator detects loop current and converts it to 4~20mA (sink) signals, and also provides transmitters with power. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
16

A系列智能数字显示报警仪
智能数字显示报警仪能够配接分歧的输入信号（热电偶/热电阻/直流电压/直流电流/线性电阻等），同时显示量程、变送量程、报警节造、通讯等可由用户现场设置，可与各类传感器、变送器共同使用，实现对温度、压力、液位、容量、力等物理量的丈量显示、变送、报警节造、数据采集和纪录，其合用领域极度宽泛。

- +
17

1 input and 1 outputNPGL-HM11D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It allows transmission of HART communication signals. It needs a backplane power supply. The input, output, and power supply are galvanically isolated from each other.

- +
18

1 input and 1 outputNPGLB-CM11D
This isolator accepts 4 ~ 20 mA signal to drive executive mechanisms. It allows transmission of HART communication signals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other.

- +
19

1 input and 1 outputNPGL-CM11D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
20

1 input and 1 outputNPGLB-CM11D
This isolator accepts 4 ~ 20 mA signal to drive executive mechanisms. It allows transmission of HART communication signals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other.

- +
21

1 input and 2 outputsNPGL-CM111D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
22

1 input and 1 outputNPGL-CM11D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
23

Three-phase(TN-S、TT) AC systemP-FL-385/40×3P+N
According to IEC and GB standard，SPD can release high voltage pulse energy,and limit surge in a safety voltage level. The complete device consists of a base module and plug-in protection modules and is ready for installation. It is suitable for LPZ0B ~ LPZ1 area and higher.

- +
24

1 input and 1 outputNPEXA-C711
Communication input isolated barrier, it converts the RS-485 digital signals from a hazardous area into RS-485 digital signals to a safe area by isolation, and also provides transmitters with power in the hazardous area. The input, output, and power supply are galvanically isolated from each other.

- +
25

1 input and 3 outputsNPGL-C1111D
This isolator converts the current signals to 4~20mA signals, and also provides transmitters with power. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
26

1 input and 1 outputNPGLB-CM11D
This isolator accepts 4 ~ 20 mA signal to drive executive mechanisms. It allows transmission of HART communication signals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other.

- +
27

1 input and 1 outputNPEXA-CM31
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
28

1 input and 1 outputNPEXA-HM31
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. It needs a backplane power supply. The input, output, and power supply are galvanically isolated from each other.

- +
29

1 input and 1 outputNPEXA-H01
Temperature input isolated barrier, it converts the thermocouple/thermal resistance signals from a hazardous area into 4~20mA signals to a safe area by isolation. It has external cold junction compensation terminals. It needs a backplane power supply. The input, output, and power supply are galvanically isolated from each other. The self-test function is also available on this device. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
30

1 input and 2 outputsNPEXA-C011H
Temperature input isolated barrier, it converts the thermocouple/thermal resistance signals from a hazardous area into 4~20mA signals to a safe area by isolation. It has external cold junction compensation terminals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. The self-test function is also available on this device. Calibrate the apparatus or modify parameters by using a handheld programmer.nt power supply.

- +
31

24V Signal systemS-FLP-2P-24.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2-wire pressure transmitter, valve positioner, electrical converter, flowmeter, solenoid valve and RS485 ect.

- +
32

1 input and 1 outputNPEXA-C01H
Temperature input isolated barrier, it converts the thermocouple/thermal resistance signals from a hazardous area into 4~20mA signals to a safe area by isolation. It has external cold junction compensation terminals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. The self-test function is also available on this device. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
33

1 input and 1 outputNPEXA-C01H
Temperature input isolated barrier, it converts the thermocouple/thermal resistance signals from a hazardous area into 4~20mA signals to a safe area by isolation. It has external cold junction compensation terminals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. The self-test function is also available on this device. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
34

24V Signal systemS-FLT-2-24.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2 - wire pressure transmitter, valve positioner, electr i c a l converter, flowmeter, solenoid valve and other field instruments and FF, PROFIBUS PA ect.

- +
35

2 inputs and 2 outputsNPEXA-K5D11
Digital input isolated barrier, it converts switch or proximity detector signals (dry contact or NAMUR) from a hazardous area into relay signals to a safe area by isolation. The normal output sate and line fault detection function can be set with the DIP switch. The input, output, and power supply are galvanically isolated from each other.

- +
36

1 input and 1 outputNPEXB-CM31
Analog output isolated barrier, it transfers 4~20mA signals from a safe area to a hazardous area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other. The LFD function of output short-circuit/ line-break can be closed by the DIP switch on the front side.

- +
37

1 input and 1 outputNPEXB-CM31
Analog output isolated barrier, it transfers 4~20mA signals from a safe area to a hazardous area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other. The LFD function of output short-circuit/ line-break can be closed by the DIP switch on the front side.

- +
38

24V Signal systemS-FLP-2P-24.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2-wire pressure transmitter, valve positioner, electrical converter, flowmeter, solenoid valve and RS485 ect.

- +
39

1 input and 2 outputsNPEXA-CM177
Millivolt input isolated barrier, it transfers the millivolt signals from a hazardous area to a safe area. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. It has the function of setting over range output when the input is disconnected.

- +
40

1 input and 2 outputsNPEXA-H171
Temperature input isolated barrier, it converts the thermocouple signals from a hazardous area into 1:1mV and 4~20mA signals to a safe area by isolation. It has external cold junction compensation terminals. It needs a backplane power supply. The input, output, and power supply are galvanically isolated from each other. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
41

1 input and 1 outputNPEXA-C711
Communication input isolated barrier, it converts the RS-485 digital signals from a hazardous area into RS-485 digital signals to a safe area by isolation, and also provides transmitters with power in the hazardous area. The input, output, and power supply are galvanically isolated from each other.

- +
42

5V Voltage SystemS-FLS-2-5.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2 wire RTD, TC, RS-485, MODBUS, PROFIBUSDP, CAN ect.

- +
43

5V Signal systemS-FLT-2-5.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2 wire RTD, TC，RS-485, MODBUS, PROFIBUS-DP, CAN and other products.

- +
44

24V Voltage SystemS-FLS-2-24.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2-wire pressure transmitter, valve positioner, electrical converter, flowmeter, solenoid valve and other field instruments and FF, PROFIBUS PA ect.

- +
45

1 input and 1 outputNPGL-C11D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
46

1 input and 1 outputNPGL-CM11D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
47

1 input and 1 outputNPEXA-C711
Communication input isolated barrier, it converts the RS-485 digital signals from a hazardous area into RS-485 digital signals to a safe area by isolation, and also provides transmitters with power in the hazardous area. The input, output, and power supply are galvanically isolated from each other.

- +
48

5V Signal systemS-FLT-2-5.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2 wire RTD, TC，RS-485, MODBUS, PROFIBUS-DP, CAN and other products.

- +
49

24V Signal systemS-FLT-2-24.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2 - wire pressure transmitter, valve positioner, electr i c a l converter, flowmeter, solenoid valve and other field instruments and FF, PROFIBUS PA ect.

- +
50

2 inputs and 2 outputsNPEXA-CM3D11
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
51

Single-phase(TN-S) AC systemP-FL-385/40×2P
According to IEC and GB standard，SPD can release high voltage pulse energy,and limit surge in a safety voltage level. The complete device consists of a base module and plug-in protection modules and is ready for installation. It is suitable for LPZ0B ~ LPZ1 area and higher.

- +
52

1 input and 1 outputNPEXA-CM31
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
53

C系列智能温度调节器
智能温度调节器宽泛利用于工业机械、机床、丈量仪器的智能节造领域。仪表选取开关电源和表表贴装技术，表观精彩，机能靠得住；同时选取专用微处置器，拥有自诊断、自整定和智能节造职能，操作单一，节造成效好。

- +
54

1 input and 2 outputsNPGL-C111
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
55

1 input and 2 outputsNPGL-C111D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
56

1 input and 2 outputsNPGLA-C111D
This LCD isolator converts the current signals to 4~20mA signals, and also provides transmitters with power. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
57

1 input and 1 outputNPEXA-C11H
Temperature input isolated barrier, it converts the thermocouple signals from a hazardous area into 4~20mA signals to a safe area by isolation. It has external cold junction compensation terminals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. The self-test function is also available on this device. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
58

1 input and 1 outputNPEXA-CM31L
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. The input and output is galvanically isolated from each other.

- +
59

1 input and 1 outputNPGL-CM11D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
60

1 input and 1 outputNPEXA-C41
Analog input isolated barrier, it converts the voltage signals from a hazardous area into 4~20mA signals to a safe area by isolation. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
61

B系列智能手操器
智能手操器拥有多种类型输入可编程职能，能够配接调节器、PLC或DCS的输入信号，驱动节造阀门作为，也可与各类传感器、变送器共同使用，实现对温度、压力、液位、容量、力等物理量的丈量显示、调节、报警节造和数据采集，其合用领域极度宽泛。

- +
62

B系列智能手操器
智能手操器拥有多种类型输入可编程职能，能够配接调节器、PLC或DCS的输入信号，驱动节造阀门作为，也可与各类传感器、变送器共同使用，实现对温度、压力、液位、容量、力等物理量的丈量显示、调节、报警节造和数据采集，其合用领域极度宽泛。

- +
63

A系列智能数字显示报警仪
智能数字显示报警仪能够配接分歧的输入信号（热电偶/热电阻/直流电压/直流电流/线性电阻等），同时显示量程、变送量程、报警节造、通讯等可由用户现场设置，可与各类传感器、变送器共同使用，实现对温度、压力、液位、容量、力等物理量的丈量显示、变送、报警节造、数据采集和纪录，其合用领域极度宽泛。

- +
64

1 input and 1 outputNPGL-C11D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
65

1 input and 2 outputsNPGL-C111D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
66

1 input and 2 outputsNPWD-C11DH.TC
This temperature transmitter converts the thermocouple signals to 4~20mA signals. It has external cold junction compensation terminals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. The self-test function is also available on this device. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
67

1 input and 1 outputNPGL-CM11D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
68

2 inputs and 2 outputsNPEXA-CM3D11
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
69

1 input and 1 outputNPEXA-K01
Temperature input isolated barrier, it converts the thermocouple/thermal resistance signals from a hazardous area into 4~20mA signals to a safe area by isolation. It has external cold junction compensation terminals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other.

- +
70

A系列智能数字显示报警仪
智能数字显示报警仪能够配接分歧的输入信号（热电偶/热电阻/直流电压/直流电流/线性电阻等），同时显示量程、变送量程、报警节造、通讯等可由用户现场设置，可与各类传感器、变送器共同使用，实现对温度、压力、液位、容量、力等物理量的丈量显示、变送、报警节造、数据采集和纪录，其合用领域极度宽泛。

- +
71

1 input and 1 outputNPMV-C011D
This millivolt transmitter converts the millivolt signals to 4~20mA signalssignals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. The self-test function is also available on this device. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
72

A系列智能数字显示报警仪
智能数字显示报警仪能够配接分歧的输入信号（热电偶/热电阻/直流电压/直流电流/线性电阻等），同时显示量程、变送量程、报警节造、通讯等可由用户现场设置，可与各类传感器、变送器共同使用，实现对温度、压力、液位、容量、力等物理量的丈量显示、变送、报警节造、数据采集和纪录，其合用领域极度宽泛。

- +
73

Single-phase(TN-S) AC systemP-FL-385/40×2P
According to IEC and GB standard，SPD can release high voltage pulse energy,and limit surge in a safety voltage level. The complete device consists of a base module and plug-in protection modules and is ready for installation. It is suitable for LPZ0B ~ LPZ1 area and higher.

- +
74

Single-phase(TN-S) AC systemP-FL-385/40×2P
According to IEC and GB standard，SPD can release high voltage pulse energy,and limit surge in a safety voltage level. The complete device consists of a base module and plug-in protection modules and is ready for installation. It is suitable for LPZ0B ~ LPZ1 area and higher.

- +
75

A系列智能数字显示报警仪
智能数字显示报警仪能够配接分歧的输入信号（热电偶/热电阻/直流电压/直流电流/线性电阻等），同时显示量程、变送量程、报警节造、通讯等可由用户现场设置，可与各类传感器、变送器共同使用，实现对温度、压力、液位、容量、力等物理量的丈量显示、变送、报警节造、数据采集和纪录，其合用领域极度宽泛。

- +
76

1 input and 2 outputsNPGL-CM111D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
77

1 input and 2 outputsNPEXA-CM311
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
78

5V Signal system S-FLT-3-5G
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 3 or 4 transmitter, RS-422 ect.

- +
79

24V Signal systemS-FLP-2P-24.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2-wire pressure transmitter, valve positioner, electrical converter, flowmeter, solenoid valve and RS485 ect.

- +
80

24V Signal systemS-FLT-2-24.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2 - wire pressure transmitter, valve positioner, electr i c a l converter, flowmeter, solenoid valve and other field instruments and FF, PROFIBUS PA ect.

- +
81

1 input and 1 outputNPGL-CM11D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
82

B系列智能巡检仪
智能巡检仪选取？樯杓坪椭悄芩惴，与各类传感器、变送器共同使用，可对多路温度、压力、液位、流量、沉量等工业过程参数进行巡回检测、报警节造、变送输出、数据采集及通讯。

- +
83

1 input and 2 outputsNPEXA-CM31S1S
Analog input isolated barrier, it detects loop current and converts it from a hazardous area into 4~20mA（sink） signals to a safe area by isolation, and also provides transmitters with power in the hazardous area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
84

1 input and 2 outputsNPEXA-CM311
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
85

24V DC power systemS-FLT-2-24D
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 24V DC power system.

- +
86

24V DC power systemS-FLS-2-24D
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 24V DC power system.

- +
87

24V Signal systemS-FLT-2-24.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2 - wire pressure transmitter, valve positioner, electr i c a l converter, flowmeter, solenoid valve and other field instruments and FF, PROFIBUS PA ect.

- +
88

5V Signal systemS-FLT-2-5.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2 wire RTD, TC，RS-485, MODBUS, PROFIBUS-DP, CAN and other products.

- +
89

24V Voltage SystemS-FLS-2-24.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2-wire pressure transmitter, valve positioner, electrical converter, flowmeter, solenoid valve and other field instruments and FF, PROFIBUS PA ect.

- +
90

5V Voltage SystemS-FLS-2-5.Ex
This SPD limits induced transients of different origin (lightning stroke, switching impulse, etc.). This is achieved by diverting the transient current to ground and limiting the signal line voltage to a safe level for the duration of the surge. It can be applied to 2 wire RTD, TC, RS-485, MODBUS, PROFIBUSDP, CAN ect.

- +
91

1 input and 1 outputNPGL-C711
This isolator transfers the RS485 digital signals and provides isolated power supply for field devices. The input, output, and power supply are galvanically isolated from each other.

- +
92

1 input and 1 outputNPEXA-C711
Communication input isolated barrier, it converts the RS-485 digital signals from a hazardous area into RS-485 digital signals to a safe area by isolation, and also provides transmitters with power in the hazardous area. The input, output, and power supply are galvanically isolated from each other.

- +
93

1 input and 1 outputNPEXA-C711Z
Communication input isolated barrier, it converts the RS-485 digital signals from a hazardous area into RS-485 digital signals to a safe area by isolation, and also provides transmitters with power in the hazardous area. The input, output, and power supply are galvanically isolated from each other.

- +
94

Single-phase(TN-S) AC systemP-FL-385/60×2P
According to IEC and GB standard, SPD can release high voltage pulse energy,and limit surge in a safety voltage level. The complete device consists of a base module and plug-in protection modules and is ready for installation. It is suitable for LPZ0B ~ LPZ1 area and higher.

- +
95

- +
96

1 input and 1 outputNPEXA-C01H
Temperature input isolated barrier, it converts the thermocouple/thermal resistance signals from a hazardous area into 4~20mA signals to a safe area by isolation. It has external cold junction compensation terminals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. The self-test function is also available on this device. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
97

1 input and 1 outputNPGL-CM11D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
98

1 input and 2 outputsNPEXA-C5111
Digital input isolated barrier, it converts switch or proximity detector signals (dry contact or NAMUR) from a hazardous area into relay signals to a safe area by isolation. Operation mode, output 2 function and the input circuit fault detection function can be set with the DIP switch. The input, output, and power supply are galvanically isolated from each other.

- +
99

1 input and 1 outputNPEXA-CM31
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
100

2 inputs and 2 outputsNPEXA-C0D11
Temperature input isolated barrier, it converts the thermocouple/thermal resistance signals from a hazardous area into 4~20mA signals to a safe area by isolation. It has external cold junction compensation terminals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. The self-test function is also available on this device. Calibrate the apparatus or modify parameters by using a handheld programmer.ation terminals. It needs an independent power supply.

- +
101

1 input and 2 outputsNPGL-C111
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
102

2 inputs and 2 outputsNPGL-CMD111D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
103

1 input and 1 outputNPGL-CM11D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
104

1 input and 1 outputNPWD-C1DH.TC
This temperature transmitter converts the thermocouple signals to 4~20mA signals. It has external cold junction compensation terminals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. The self-test function is also available on this device. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
105

- +
106

Single-phase(TN-S) AC systemP-FL-385/40×2P
According to IEC and GB standard，SPD can release high voltage pulse energy,and limit surge in a safety voltage level. The complete device consists of a base module and plug-in protection modules and is ready for installation. It is suitable for LPZ0B ~ LPZ1 area and higher.

- +
107

24VDC Power SystemP-FL-24/20.D
It can use for 24VDC power system, protected terminal equipment, limit surge and meet to a safety voltage. comprising a base part and a plug-in protection modulel. It is suitable for LPZ1 ~ LPZ2 area and higher.

- +
108

1 input and 1 outputNPGL-CM11D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
109

1 input and 1 outputNPWD-C1D.RTD
This temperature transmitter converts the thermal resistance signals to 4~20mA signals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. The self-test function is also available on this device. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
110

2 inputs and 2 outputsNPEXA-CM3D11
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
111

1 input and 2 outputsNPEXA-C011H
Temperature input isolated barrier, it converts the thermocouple/thermal resistance signals from a hazardous area into 4~20mA signals to a safe area by isolation. It has external cold junction compensation terminals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. The self-test function is also available on this device. Calibrate the apparatus or modify parameters by using a handheld programmer.nt power supply.

- +
112

1 input and 1 outputNPGL-C11
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
113

1 input and 1 outputNPGL-CM11D
This isolator detects loop current and converts it to 4~20mA signals, and also provides transmitters with power. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
114

2 inputs and 2 outputsNPWD-CD11D
This temperature transmitter converts the thermocouple or thermal resistance signals to 4~20mA signals. It has external cold junction compensation terminals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. The self-test function is also available on this device. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
115

2 inputs and 2 outputsNPEXB-CM3D11
Analog output isolated barrier, it transfers 4~20mA signals from a safe area to a hazardous area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
116

2 inputs and 2 outputsNPEXA-CM3D11
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
117

4 inputs and 4 outputsNPEXA-C5F11
Digital input isolated barrier, it converts switch or proximity detector signals (dry contact or NAMUR) from a hazardous area into relay signals to a safe area by isolation. The normal output sate can be set with the DIP switch. The input, output, and power supply are galvanically isolated from each other.

- +
118

2 inputs and 2 outputsNPEXA-C5D111
Digital input isolated barrier, it converts switch or proximity detector signals (dry contact or NAMUR) from a hazardous area into relay signals to a safe area by isolation. The normal output sate and line fault detection function can be set with the DIP switch. The input, output, and power supply are galvanically isolated from each other.

- +
119

1 input and 1 outputNPEXA-C512
Digital input isolated barrier, it converts switch or proximity detector signals (dry contact or NAMUR) from a hazardous area into transistor signals to a safe area by isolation. The normal output sate and line fault detection function can be set with the DIP switch. The input, output, and power supply are galvanically isolated from each other.

- +
120

1 input and 1 outputNPEXA-C511
Digital input isolated barrier, it converts switch or proximity detector signals (dry contact or NAMUR) from a hazardous area into relay signals to a safe area by isolation. The normal output sate and line fault detection function can be set with the DIP switch. The input, output, and power supply are galvanically isolated from each other.

- +
121

1 input and 1 outputNPEXA-CM31
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
122

2 inputs and 2 outputsNPEXA-CM3D11
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
123

1 input and 4 outputsNPGL-C11111D
This isolator converts the current signals to 4~20mA signals, and also provides transmitters with power. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
124

1 input and 3 outputsNPGL-C1111D
This isolator converts the current signals to 4~20mA signals, and also provides transmitters with power. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
125

1 input and 1 outputNPEXB-C511
Digital output isolated barrier. By switch signal controlling, transfers the dry contact signals from a safe area into current signals to a hazardous area, and drives field device like intrinsically safe valves, audible alarms, etc. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other.

- +
126

1 input and 1 outputNPEXA-C01H
Temperature input isolated barrier, it converts the thermocouple/thermal resistance signals from a hazardous area into 4~20mA signals to a safe area by isolation. It has external cold junction compensation terminals. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other. The self-test function is also available on this device. Calibrate the apparatus or modify parameters by using a handheld programmer.

- +
127

2 inputs and 2 outputsNPEXA-CM3D11
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
128

2 inputs and 2 outputsNPEXB-CM3D11
Analog output isolated barrier, it transfers 4~20mA signals from a safe area to a hazardous area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +
129

2 inputs and 2 outputsNPEXB-C5D11L
Digital output isolated barrier. By switch signal controlling, transfers the wet contact signals from a safe area into current signals to a hazardous area, and drives field device like intrinsically safe valves, audible alarms, etc. It has loop powered. The input and output is galvanically isolated from each other.

- +
130

2 inputs and 2 outputsNPEXB-C5D11
Digital output isolated barrier. By switch signal controlling, transfers the dry contact signals from a safe area into current signals to a hazardous area, and drives field device like intrinsically safe valves, audible alarms, etc. It needs an independent power supply. The input, output, and power supply are galvanically isolated from each other.

- +
131

2 inputs and 2 outputsNPEXA-C5D111
Digital input isolated barrier, it converts switch or proximity detector signals (dry contact or NAMUR) from a hazardous area into relay signals to a safe area by isolation. The normal output sate and line fault detection function can be set with the DIP switch. The input, output, and power supply are galvanically isolated from each other.

- +
132

2 inputs and 2 outputsNPEXA-CM3D11
Analog input isolated barrier, it provides transmitters with power in the hazardous area and transfers 4~20mA signals from a hazardous area to a safe area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other.

- +

全选

玖鼎集团·(中国区)有限公司官网

移除对比选中的产品(最多三项)

您的信息

玖鼎集团·(中国区)有限公司官网

玖鼎集团·(中国区)有限公司官网

Nanjing?New?Power?Electric?Technology?Co.,?Ltd

Addr.: 6 Floor, Building1, New Space Development Center, No.126 tianyuan middle road, jiangning district, Nanjing

Zip code: 211100

Tel: +86(25)84459303 84459429 84459479

Fax: +86(25)84519256

E-mall: master@anpe.cn

Service Tel: 800-828-9961

New park: 19 Jinxin Middle Road, Jiangning District, Nanjing (Jiangning Development Zone)

玖鼎集团·(中国区)有限公司官网

玖鼎集团·(中国区)有限公司官网

Newpwr official website

玖鼎集团·(中国区)有限公司官网

Newpwr WeChat official account

玖鼎集团·(中国区)有限公司官网

== Friendly link ==

漯河玖鼎集团自动化系统有限公司

Nanjing?New?Power?Electric?Technology?Co.,?Ltd @ China All Rights Reserved

De-contrast Clear contrast bar

【网站地图】